#Radio clock temperature manuals
#Radio clock temperature update
#Radio clock temperature manual
#Radio clock temperature free

This will stop the clock from searching for the Atomic radio signal.ДЄ) Press the UP (s) ARROW to turn DST (Daylight Saving Time) function on or off. Press the UP ( ) ARROW to or DOWN ( ) ARROW buttons to turn OFF the Atomic signal.

#Radio clock temperature manual

As long as the atomic clock is ON, it will automatically adjust itself to the correct time, overriding your manual setting. However, you may choose to deactivate the atomic clock feature completely if you prefer to manually control the clock or if you live in a remote area that does not readily receive the atomic signal. Once the clock receives the signal, it will adjust the clock accordingly. NOTE: You do NOT need to turn off the atomic clock to set the time manually. If most or all 4 of the bars are present, wireless reception is good and no action is required.ДЄ) Press and HOLD the SET button until you see the selection of seven time zones Then RELEASE.Д«) Press the UP ( ) ARROW repeatedly until you reach your time zone, then press SET and release.

In either case, you may need to relocate one or both of the units. If there are a low number of вЂњbarsвЂќ present, you may experience no temperature display The main unit has a signal reception icon near the outdoor temperature display area. To ensure anДЄccurate temperature reading, be sure the sensor is out of direct sunlight and away from any heat sources. However, to extend the life of the product, place it in an area protected from harsh weather elements. The sensor is water-resistant and is designed for outdoor use. You may place your wireless temperature sensor outside up to 100 feet (30m) from the clock, as shown. The wireless temperature sensor MUST BE PLACED OUTDOORS to capture and relay the outdoor temperature to the clock display unit. This clock may be hung on a wall using the integrated wall-hanging hole, or you may place the unit on a tabletop or other fat surface using the swing-out stands. To help ensure an accurate indoor temperature measurement, be sure to place the main unit out of direct sunlight, and away from any heat sources or vents in your home.

#Radio clock temperature free

Place the clock in an area free of dirt and dust. we recommend using lithium batteries in extreme low-temperature conditions to ensure the continued operation of the outdoor sensor.ДЇor the digital atomic clock, we recommend only alkaline batteries. this may cause the outdoor wireless sensor to stop transmitting temperature readings. In the event you wish to manually change the clock settings, please use the instructions on page 5.Д®xtended periods of extremely cold temperatures (below -4В°f/ -20В°c) can cause alkaline batteries to function improperly. Press the UP (s) ARROW repeatedly until you reach your time zone, then press SET Press and HOLD the SET button until you see the selection of seven-time zones flashing on the LCD screen, then release.Дў.

#Radio clock temperature update

Note: The clock will adjust for daylight saving time, even if it is unable to receive the WWVB signalДЄfter the clock acquires the Atomic signal (this may take 24-48 hours) the time, date, and daylight saving time changes will update automatically, giving you maintenance-free operation and accuracy to the split second ДЎ. The clock will begin searching for the Atomic signal. It will also begin displaying the temperatures. The clock will initially set itself to the correct time and date, defaulting to EST (Eastern Standard Time).

Initial Setup вЂ“ once the batteries are installed, the clock will power up.

Battery Installation вЂ“ BEGIN WITH THE OUTDOOR WIRELESS SENSO.

Most synchronization will happen at night when there is less interference.

PLEASE NOTE: Due to solar radiation in the atmosphere, the atomic clock signal is weaker during the day. WhatвЂ™s more, the IntelliTimeВ® technology built into this clock makes for hassle-free automatic setting and resetting for daylight saving time. To maintain the best possible reception, place the unit so that the backside faces in the general direction of Colorado. This quality TIMEXВ® clock includes a built-in receiver that picks up the Atomic radio signal from WWVB. In North America, the National Institute of Standards and Technologies (NIST) operates an Atomic clock in Fort Collins, Colorado, that transmits the time codes via the radio station WWVB.

#Radio clock temperature manuals

8.2 Related Manuals / Resources WHAT IS AN ATOMIC CLOCK?ДЄn Atomic clock is a timepiece that maintains accuracy up to one second per million years using the most precise method of time synchronization, radio signals.